http://boxwrench.3dcartstores.com/Basic-Engine-Building-DVD_p_0-8.html Click here for the "Basic Engine Building" DVD Basic Engine Building DVD - Chapter 53: Ignition The second part of the "Ignition" section shows you how to find the initial timing of your engine, with or with out a top dead.... more

Today we are going to show you how to do a hardwire install on a 1999 Lexus RX300. We will be installing part number 118176 by Modulite. We will also be using the accompanying Modulite wiring kit part number 118151. To begin our install what we are going to do is take apart the plastic on the inside of the vehicle. It.... more

Today we are going to install part number 118446 from Tow Ready on our 2008 Dodge Grand Caravan. First what we need to do to start is get behind the tail lights. So we will have to open up the trunk and take out 2 screws on each side to undo the tail lights. There are 2 torque screws that have to come out and you just.... more

Today we are going to cover kind of a different subject. Basically, we are going to talk about getting your wiring installed and what is happening afterward. Okay, for instance, you went to the trouble to get your wiring installed, you plug it into your trailer, and nothing happens. There could be a lot of different.... more

Step one would be to get to the wiring itself, that's going to require removing a couple of panels and loosening a couple. First thing to do is take out the trunk tray, the threshold and loosen the two side panels. Taking off that panel will allow us to get this panel loose here to get to the junction box.... more

At last the wiring is almost complete. Only the BMS and cosmetics to be sorted now!

First we'll open up the rear door and start disassembling the tail lights and take them off the body. We'll go ahead and take off one of the tail lights here. There's two torque bolts that need to be taken out and light pops off from the housing. Okay the lights are off so now it's time to start installing the wire..... more

This part number will fit 1995-1/2 - 2004 Toyota Tacomas and 1985-1995 Toyota pickups. The first steps involved is taking off the taillight assemblies. We'll put them off to the side and then run our wiring inside. We'll start on the drivers side first and work our way to the passengers side. We'll disconnect the.... more

Automotive wiring car be tricky. Learn how to test your added wire accessories in this free video clip.

This video shows how to install a vehicle wiring harness, so that you can tow a trailer, on a vehicle that does not have a factory tow package. Most vehicles will have custom T-one connectors available which will simply plug into the vehicles wiring. If your vehicle does not have a custom fit wiring harness available.... more