Step by step instructions on how to MIG weld a puddle joint with expert tips on using MIG welders in this free welding video clip.

See how easy it is to get durable welds using the Drader Injectiweld W30.000. Repairs, Constructions, Prototyping. We are producing plastic welding rod for your applications.

Am keeping track of old sube of mine,with mpeg2 camera. This weekend was many hours of welding. found some interesting errors, along with the broken rear end. Goal was to finish off the rocker panel, wheel well arches, and small patches underneath.I ended up finding two other problems that took my time. so far it is.... more

Tig weldig a flight control stick for a small aircraft using 4130 chrome alloy

I was inspired by Alex good looking t-joint tig weld yesterday. I just had to tig weld a 2.5mm aluminium T-joint with pulse. Pulse settings and final weld puddle shown in movie. After the welding I was so happy with the weld puddle that I was extra happy for at least 3 hours... .

This is a simulated break in a steel bracket. Position the bracket and then tack weld. Once it's tack welded gas weld front and back. Put a short video Braze vs. Weld at http://www.gsegmedia.com/forum/short%20videos/short_videos.htm

So I got this new welder just yesterday, and am practicing running some beads with the AC and DC+ features, running at 140 AC amps drawing probably 25 amps at 220v, 140 amperes at AC and DC is the maximum amperage I can get 100% duty cycle at and is a little overboard for the 1/8 rod I am using, but the machine is.... more

A clean MIG welder will last longer and work better. Learn the proper way to clean a MIG welder with expert tips in this free welding video.

Just starting out AC Tig welding - comments welcomed. ******* Welding on scrap 2mm 5356 aluminium. 2.4mm zirconiated tungstens 2.4mm 5356 filler rods pure argon AC approx 75Amps, 0 wave Balance, 60hz no pulse

I welded this lap joint with my lincoln idealarc this time wired correctly, I think I was using AC at around 100 amps, 6013 rod, pictures at end, second picture I think I got less penetration, these welds are being done to my latest project a ghetto shifter cart, its not gonna look very good, but it will be built well.... more